Arduino Jobs

Project Description: Raspery pi zero data logger I am looking for a skilled freelancer to create a data logger using Raspberry Pi Zero. The data logger will specifically log temperature data. Skills and Experience: - Experience with Raspberry Pi Zero and its peripherals - Proficiency in programming languages such as Python - Knowledge of temperature sensors and data logging techniques Requirements: 1. Data Logging: The data logger should be able to record temperature data at regular intervals. - The data should be logged every minute. 2. Connectivity: The data logger can function both online and offline. - It should have the capability to connect to the internet, but it should also be able to function offline if needed. If you have experience with Raspberry Pi Zero and data log...

I am looking for a freelancer to modify an existing menu library for the ESP32 and ILI9341. The specific modifications needed include revising the menu library to use the Arduino_GFX_Library instead of the Adafruit GFX Library. Skills and Experience: - Proficiency in Arduino programming - Experience with ESP32 and ILI9341 - Familiarity with the Arduino_GFX_Library The Arduino_GFX_Library is already installed, so there is no need for assistance with installation. The timeline for this project is 5 days, so I am looking for someone who can complete the modifications within this timeframe.

Need Simple arduino ide code for BDK-ATxx4-MSTP() for bacnet communication object need is -device -ai1>read only>room temp>any pin free -av1>r/w>room setpoint -bv1>r/w>valve relay>any pin free -any other mandatory object Instance will be mac adress+ 10000…. Ie if Mac Is 45 instances will be 10045 Av2 will be the instance value that will be available to be customized if bv2 is enabled

I have a small urgent job where you have to program pick Microcontroller when Abbas but is boost it shows on LED a certain message and if the button is not pressed or the button pressed has the same state as Pieas then it displayed thank you

I am looking for a knowledgeable freelancer to help me with my coding project. I plan to use an Arduino sensor to monitor temperature and when the temperature reaches a certain threshold, trigger an alarm. I am looking for a contactless temperature, shock, and accelerometer sensor that can detect changes in temperature accurately and reliably. The desired response when the threshold is met would be to trigger an alarm. The task would require the knowledge and experience to code the Arduino sensor so that it can detect certain changes in temperature and respond accordingly. If you feel confident that you can complete this project and you have experience with coding Arduino sensors, please consider placing a bid. Thank you for your time.

I am looking for a freelancer who can help me with coding for my IOT sound detection devices project. i need to detect insect in using Arduino sensors my frequency is 40-44-38kmz i need to develop code and diagram for circuits Sound sensors: - The code should be developed specifically for sound sensors. Sound recognition: - The primary function of the sound detection is sound recognition. - The code should be able to identify and classify different sounds. Preferred programming language: - The code should be written in C++. Skills and experience: - Proficiency in C++ programming language. - Experience in working with sound sensors and sound recognition algorithms. - Knowledge of IOT and embedded systems. - Strong problem-solving skills. - Attention to detail and ability to write e...

GPS Tracking Software for UMGV (unmaned ground vehicle)Project Overview: I am looking for a skilled developer to create a GPS tracking software for my UMGV (Unmanned Ground Vehicle) project. The purpose of the software is to enable the robo vehicle to navigate along GPS coordinates accurately. Specific Features: - The software should include a real-time vehicle tracking feature, allowing me to monitor the location of the UMGV at all times. - It shall be possible to,enter the cordinate,in the controlers like Arduino,and GPS attached to Arduino should take this as input and define the path to reach to the desired location. Platform: The GPS tracking software should be designed to work on both web and mobile platforms, ensuring accessibility and convenience. Ideal Skills and Experience: ...

I have several Mikroe click boards. I am going to design a system which get biomedical data using ECG EEG sensors(which are Mikroe ECG/EEG/PPG boards). Based on boards I have, I need somone who write STM32 codes (using HAL)and help me to implement the project. Additionally, I am interested in having the embedded system provide sensor integration functionalities. As a result, knowledge in communicating with sensors, obtaining data, and storing in SD card. For this project, experience with embedded systems and C++ programming is a must.

I am seeking the expertise of someone well-versed in electronics, circuit building, testing, and (NodeRed) programming to build a circuit for me. Resource: Purpose: I have a PV (Solar) system, NodeRed and an OpenEnergyMonitor system that keeps track of power being imported or export and a Zip Tap (instant boiling water). Using NodeRed, I have a number of appliances that only turn on when there is excess solar, making use of the power I generate rather than exporting to the grid. The Zip tap has a 1200w (240v/50Hz) heating element that will turn on when water is used. Though this is a commercial unit, I'm using it domestically and so running the heater at full power isn't necessary. What I would like to do, is interrupt the circuit to the heater so that only excess power is...

Hi Guys, I need some changes made to some firmware and to be upfront my budget is ~$100. Sorry if this is too low, I don't mean to be insulting, it's just all I have to spend on this problem. Hopefully it is something you can do. I've ordered a M5StickC Plus and when it arrives I want to install this firmware: However I would also like these changes to the code: (a) I'd like to have the word "ready" on the screen when not logging but ready to go. (b) " have the word "Logging" on the screen when it is logging. (c) I need the Buzzer to sound when I start and stop logging. So, what do you think? Are you interested in this one? With thanks, Craig ----- I am looking for an experienced Arduino developer to edit the existing firmware co...

I am looking for an experienced freelancer who can help me with an Arduino micro project. This project involves using proximity sensors to trigger specific keystroke combinations on a Windows PC. Specific actions triggered on the Windows PC: - The proximity sensors should be able to perform a specific keystroke combination. Desired range of the proximity sensors: - The desired range for the proximity sensors is less than an inch. Number of proximity sensors needed: - I require 5 proximity sensors for this project. Skills and experience required: - Strong knowledge and experience with Arduino micro projects. - Proficiency in programming and coding for Arduino. - Familiarity with proximity sensors and their integration with Arduino. - Understanding of Windows PC operating system and abi...

I am looking for a freelancer who can help me with a simple SD Card driver code for my STM32F4 microcontroller. Specific requirements for the SD Card driver include basic read/write functionality. I need this project to be completed within a week. Ideal skills and experience for this job include: - Proficiency in STM32F4 microcontroller - Experience with SD Card driver development - Strong knowledge of C programming language - Familiarity with embedded systems and firmware development I am looking for someone to write an SDIO SD card driver operating in four bit mode for STM32F407, the code needs to be implemented in STMCubeIDE (latest version) I am only interested in getting the SD card working with FAT32 so I can read and write data to it, nothing more I will be writing the ...

I am looking for a developer to create a golf swing recording software for PC. The budget for this project is less than $500. The key feature that I want in the software is slow motion playback. I would like the software to be compatible with any device or camera. User can draw lines, angles, text, over video Ideal Skills and Experience: - Experience in developing software for motion detection - Proficiency in creating slow motion playback features - Knowledge in generating swing analysis reports - Familiarity with various devices and cameras for compatibility purposes

This project Needs to identify & record new faces, be able to add names and play audio when recognition takes place. Would be using an ESP32-can board & HiLetgo YX5300 UART Control Serial MP3 Music Player Module. Currently using the ESP32-Cam library sample, but after resetting/ ON/ OFF press it erases the saved faces. Only bid if you have the modules experience and hardware on hand. Thanks!

I'm looking for a freelancer to create a bluetooth connection from an iOS app to a microphone to control specific functions on an onboard PCB. This app will need to meet certain requirements, such as controlling audio functionality including hi pass filter adjustment, attenuation, blending of 2 drivers and a boost. Although I don't have existing designs or wireframes for the app interface, I do have a rough idea of what I envision it to look like. So, I'm looking for someone who can bring my idea to fruition in an effective and efficient manner.

We want to make a smart heat meter reader (wireless and wired Mbus reader). We are working with Arduino MCU and we want to show the data presentation from the calorimeter on the serial port.

Copy-pasted bids will be rejected. We are working on a project where we have a printer(USB printer) and we want to make it wireless. So essentially we are looking to build a system that can be connected to the printer on the USB port which will do all the mods. We are open to suggestions. Operation: This system must show up as an air printer on phones and computers. the way it does for actual air printers. Once the user sends a print command to this air printer, the system must receive that and send that file to a server, AWS or anything else that can work for 1000 devices without an issue. Once the server receives the file, it must be able to make some changes to the file, mostly the pdf/image would be cropped and rescaled to a preset dimension. Once this is done, the server sends this c...

My project is to design a street light system using Arduino. The purpose of the system is to improve energy efficiency. It will use a light sensor to adjust its brightness in an intelligent way, only illuminating when necessary. My preferred power source for the system is electricity. With this system, I believe I can make a difference and help the environment by reducing energy consumption.

I am looking for a freelancer who can help me with a project involving the DWIN display interface and Arduino. The specific requirements for this project are as follows: - Serial communication with Arduino: The display interface should be able to communicate with Arduino via serial communication. Programming Language: - C: The preferred programming language for this project is C. Design Requirements: - No, I need assistance with the design: I do not have a specific design in mind for the DWIN display interface and would require assistance from the freelancer in designing it. Ideal Skills and Experience: - Proficiency in C programming language. - Experience in working with DWIN display interfaces and Arduino. - Knowledge of serial communication protocols. - Ability to assist with the de...

I am looking for a freelancer who can recreate an existing circuit diagram and component list and verify my PCB design. The complexity level of the circuit diagram is moderate. Requirements: - Recreate existing circuit diagram and component list - Verify PCB design - Test basic functionality of the final product Ideal Skills and Experience: - Experience in circuit diagram design and PCB layout - Knowledge of circuit components and their specifications - Ability to verify and test PCB designs - Attention to detail and accuracy in recreating the circuit diagram and component list

I am looking for a freelancer to create a QR code display for me. The project involves creating a digital display with a arduino or similar The main purpose of the QR codes is to provide user credentials to connect to an app. I will need 1 QR code to be displayed on a 2 - 2.5" square screen in monochrome, color is not needed Skills and experience required for this project include: - Proficiency in arduino or Raspberrypi Pico microPython - find a board and screen that is all in 1 or simply plugged together and doesn't need soldering cables together, it should be slim - receive png from node webservice via usb or wifi I have already done this a couple of years ago with a esp8866 board and ardafruit ST7735 display and a node webservice. The source code is attached. software-sp...

I am looking for a Python developer to create a library for controlling a Seaward Hal104 test equipment. The library should have the following features and functions: - Non-standard RS232 communication: The library should be able to communicate with the test equipment using a non-standard RS232 protocol. - Equipment Control: The primary function of the library should be to control the test equipment. This includes functions such as starting and stopping tests, adjusting settings, and retrieving test results. - Custom Functions: In addition to the basic equipment control functions, the library should also include some custom functions specific to our needs. These functions will be specified later. Ideal Skills and Experience: - Python: The developer should have strong experience with Pyt...

I am looking for a firmware developer with experience in TMS320 series MCU, specifically the TMS320F280049C model, for a solar hybrid inverter project. This is a power electronics of 190V to 450V DC input and output is 230V AV, 5kVA and 48V DC battery bank recharge. This solar hybrid inverter can able to operate both ongrid, offgrid and with or without battery mode. The detailed specification will be shared. The hardware design I ve already. However, the scope of the freelance is to develop the code, test it, and support online to us for testing of prototype. Deliverable: The freelancer needs to develop the microcontroller code, test it in our hardware (from online support to our team for validation). Once the system will work in all respect, then the freelance needs to handover to us th...

Need Simple arduino ide code for BDK-ATxx4-MSTP() for bacnet communication object need is -device -ai1>read only>room temp>any pin free -av1>r/w>room setpoint -bv1>r/w>valve relay>any pin free -any other mandatory object Instance will be mac adress+ 10000…. Ie if Mac Is 45 instances will be 10045 Av2 will be the instance value that will be available to be customized if bv2 is enabled

I am looking for a firmware developer who can work on my project to develop firmware for the ESP32 chip. Product development will involve following: - MQTT server integration and development. - Sensor integration -Working with WS2812 strip light -Speaker output functions Skills and experience required: - Proficiency in ESP series firmware development, specifically ESP32 and ESP 12 - Strong knowledge and experience in wireless connectivity, particularly Wi-Fi - Familiarity with WS2812, speakers and MQTT. If you have previous experience working on IoT projects and are comfortable with firmware development for the ESP series, especially the ESP32 chip, please submit your proposal.

Arduino LoRa programing assistance needed for code writing and debugging, including assistance with wiring and setup. Intended use: Sensor Monitoring Deadline: Within 1 week Skills and experience required: - Strong proficiency in Arduino programming - In-depth knowledge of LoRa communication protocol - Experience with sensor integration and data transmission - Ability to debug and optimize code for efficient performance

Project Title: Programming ESP32 Description: I am looking for a skilled programmer to work on programming an ESP32 device. The project requires the use of the Arduino programming language and should be completed within 2 weeks. Specific requirements: - I have a detailed list of functionality and features that need to be implemented on the ESP32. - Program has to read the data from modbus devices, read the analog input 4-20mA, read the digital inputs, controlling the relay outputs. ESP 32 should connect to the any cloud database by GSM or by LAN/WAN when GSM is not available. More details will be available for selected candidates. - The programmer should be experienced in working with Arduino and have a strong understanding of its capabilities. - Attention to detail is crucial to ensure ...

Project Overview: I require a PCB design that includes the following components and features: 1. **24V to 5V Converter**: The PCB should incorporate a reliable 24V to 5V voltage converter to power an ESP32 microcontroller. The power supply should provide sufficient current to ensure stable ESP32 operation. 2. **ESP32 Integration**: All pins of the ESP32 should be available on the PCB, with proper labeling and connections for easy interfacing with other components. 3. **Analog Signal Integration**: The PCB should include additional components to interface with two 4-20mA analog sensors operating at 24V. These sensors should be connected to analog input pins of the ESP32 for data acquisition and processing. remember esp32 pins are 3.3v so need to implement somthing. 4. **Antenna Port**: ...

I am looking for a developer who can help me with an IOT based software development project using Raspberry Pi. The specific functionality that I want the software to have is integration with other devices. The software will need to integrate with other IoT devices. Skills and experience needed for this project: - Proficiency in Python programming language - Knowledge of IOT and Raspberry Pi development - Experience in integrating software with other devices If you have the skills and experience required for this project, please submit your proposal. The project involves the development of a comprehensive software system with two primary data flow types: observation and configuration. The system architecture necessitates that the server be capable of configuring the attached sensors th...

Project Description: I am looking for a freelancer who can rewrite an assembly code for the XC888 microcontroller to create a secure wireless communication using RSA on the ESP8684. i have the similar project code in C++ Arduino designed for ATmega microcontroller so only contact me if you know how rewrite the code in assembly to fit with xc888 microcontroller PLEASE CHECK THIS: -the code and presentation for ATmega attached - youtube video explaning the project : The project requires the following specific features: - Encryption and decryption of wireless communication - My preferred programming language for rewriting the assembly code is [insert preferred language] - The deadline for this project is within 2 weeks. Ideal skills and experience for this job include: - Strong knowl...

I am looking for a developer with intermediate experience in RS485 and Modbus to help me develop a new monitoring system specifically for Huawei inverters. Requirements: - Expert level of experience in RS485 Modbus impementation - Familiarity with the RS485 protocol documentation - Simulation model - Troubleshooting and fixing any issues with the RS485 protocol Skills and Experience: - Intermediate level of experience in RS485 and Huawei inverters - Knowledge of the RS485 protocol documentation - Experience in developing monitoring systems for specific inverters Please note that the RS485 protocol documentation is already available, so there is no need for reverse engineering. I would like a simulation model built in an Arduino/Raspberry pi module, in which the following values are r...

Usted debe tener al menos 16 años. Este es un trabajo de nivel inicial para un aspirante a técnico de reparación de electrodomésticos que vive en América Latina. No necesita una computadora. Yo pagaré a un negocio de coworking o a un hotel para que pueda utilizar uno de sus ordenadores y su conexión a internet de alta velocidad. Puede trabajar a tiempo completo o parcial. El horario es flexible. Utilizando una aplicación como Zoom o Google Meet, ayudará a técnicos en EE. UU. a reparar electrodomésticos comerciales.

Devo produrre un posteggio con queste caratteristiche: Sotto asfalto bussolotto con rilevamento se libero o occupato da auto (Già prodotto in cina con sensore NB-IoT LoRaWAN GPRS), questo invia segnalazione ad una scatolina contenente una scheda (da fare), completa di Arduino, che rileva il comando libero e occupato. Se libero non fa niente se occupato deve fare: Parte una voce attraverso altoparlanti sulla scatolina che ripete per tre volte una frase. Oppure un "Localizzatore" tipo "Nutale 4PCS Localizzatore" blocca il messaggio quando è sopra l'auto.